Agtrailer Multifeed Wagons are built tough for South Island conditions, which require larger loads, all-year round feeding and denser, more diverse feed types. The wagons are capable of handling all feed types (e.g. silage, balage, hay, straw and veggie mix). The Agtrailer Multifeed Wagons are all fully automatic allowing the operator to focus on the terrain ahead.
The floor and elevator drive systems operate in tandem with a hydraulic sensor control unit allowing the operator to focus on driving.
The heavy-duty design of the teaser bars, chains and drive system enable the wagon to handle denser more diverse feed types allowing all-year round feeding.
The shaft, chains, bars and stub axles are all easily removed ensuring minimum down time when servicing is required.
Steel parts are power blasted, epoxy primed and coated with two pack eurethane for corrosion resistance. Chassis parts are hot-dipped galvinised while the side panels are high grade stainless steel. Additional Galvinising is available.
All models are with an assymetric, independently oscillating tandem walking beam axle. This improves manoeuvrability and reduces tyre wear on paved surfaces while maintaining good floatation suspension for rough surfaces.
The 12 & 14m3 wagons can be upgraded to a larger capacity with bolt on side panel extensions. This allows the opportunity to upgrade wagon capacity at a later stage.
No need to climb under the wagon as all greasing points are accessible from the sides of the machine. This comes standard for all machine models. An Automatic Greasing System is available as an optional accessory upgrade.
All models of the Multifeed Wagon are manufactured to be less than 3.1m wide to eliminate piloting requirements. Hazard panels, LED rear lighting and hydraulic brakes are available as an additional accessory. Refer to NZTA for towing guidelines.
2 Chain System
The wagon's floor drive system is designed from 60+ years of field experience. Through our studies the '2-chain' floor sustem rather than a '4-chain' is found to be stronger and more durable with 13mm high tensile chains rather than 10mm chains.
|Stub Axles||70 sq||70 sq||70 sq||80 sq||80 sq||90 sq|
|Floor & Elevator Drive||Gearbox||Gearbox||Gearbox||Gearbox||Gearbox||Gearbox|
|Swivel Tow Eye||Optional||Optional||Standard||Standard||Standard||Standard|
|Max Load Mass||7200kg||8400g||9600kg||10800kg||10800kg||12000kg|
* Note: 22-25m3 capacity wagons are custom built. GVM will change with optional extras.
Load cell & Display
The 12-16m3 wagons can be fitted with 6x5000kg load cells while 16HD-20m3 wagons can be fitted with 3x20000kg load cells.
Hydraulic Side Shift Conveyor
The hydraulic side shift extends the conveyor outward 250mm. This feature is useful for feeding into troughs.
Save time while hitching onto the wagon. Replace the standard jack stand with a drawbar skid.
Swivel Tow Eye
The swivel tow eye is standard for 16-20m3 wagons. It is ideal for use on uneven terrain and is a safety feature to limit wagon rollovers.
Passive Steering Axle
Recommended on all larger feed wagons to enhance the manoevrability of the wagon.
Galvinised sides is promoted for wagons to be used in high rainfall zones, protecting the wagon from the corrosive elements.
Sits above and behind the teaser bar system to prevent round bales from being carried across as a whole and blocking the conveyor system.
They're recommended for 16-20m3 range while towing on hilly terrain and when carrying denser, heavier feed.
LED Rear Lighting
Get the LED lights and hazard panels fitted to your wagon if you are planning to tow the wagon on the road.
The mudguards are hot-dipped galvinised to prevent corrosion. They are slim fitting around the tyres and will detach on impact without damaging the chassis.
Bluetooth FX15 App
Monitor the weight of the feed in the wagon from the seat of your tractor on a supported Android Device.
Auto Greasing System
An auto greasing system ensures continuous lubrication of your wagon when running, reducing costly unplanned downtime.